DIY Application Instructions

  1. Prep the lashes: Using your stainless steel tweezers, remove the lash segment from the card, then use your scissors to trim the cluster lashes to the desired length if needed. 
  2. Apply Adhesive: With your tweezers, hold the tip of the cluster and use the applicator brush to strike downward on the cluster to form a bubble of adhesive on TOP of the segment band with the bonding serum. 
  3. Place the lashes: Use the same tweezers to carefully place the cluster lash on BOTTOM of the natural lash, close to the lash line, but not touching the eyelid. Hold it in place for a few seconds to allow the glue to dry.
  4. Repeat: Repeat the process, applying clusters of lashes along the BOTTOM of the lash line until you achieve your desired look.
  5. Set with sealant: Once you've applied all the clusters, use the sealant at the base of the lash to set the lashes in place. This will help them last longer and stay put.